Herndon

Lots in the PD-B district shall have a maximum floor area ratio of 0.4. The height of structures in the PD-B district shall not exceed 45 feet.

Lots in the PD-B district shall have a maximum floor area ratio of 0.4. The height of structures in the PD-B district shall not exceed 45 feet. A minimum of 20 percent of the gross land area of the PD-B district shall be set-aside as open space.

The intent of the PD-D district is to encourage revitalization and creative design for residential and commercial lands located in the Downtown Overlay.

The floor area ratio of development shall not exceed 0.5 in the Downtown Overlay... Structures shall not exceed 50 feet in height; ... minimum side yard shall be ten feet and the minimum rear yard shall be 20 feet.

The intent of the PD-D district is to encourage revitalization and creative design for residential and commercial lands located in the Downtown Overlay of the Herndon 2030 Comprehensive Plan... Single-family detached dwelling units shall be allowed in sectors 3 and 4 of the Downtown Overlay.

The floor area ratio of development shall not exceed 0.5 in the Downtown Overlay... The height of a structure in the PD-D district shall not exceed 50 feet...

The height of a structure in the PD-TD district shall meet the following standards: ... shall not exceed 50 feet from the finished grade... Where a PD-TD district abuts land in a single-family detached zoning district, the yard immediately abutting the R-10 property shall be as follows: minimum 20 feet if it is a rear yard, minimum ten feet if it is a side yard.

The height of a structure in the PD-TD district shall not exceed 50 feet from the finished grade... Where a PD-TD district abuts land in a single-family detached zoning district, the yard immediately abutting the R-10 property shall be as follows: minimum 20 feet if it is a rear yard, minimum ten feet if it is a side yard.

The maximum floor area ratio of development within the PD-TOC district shall be subject to the following standards: ... up to a maximum intensity of 0.70 FAR ... up to 4.3 FAR ... The height of any structure shall not exceed 275 feet inclusive of parking levels.

Special exceptions to increase the densities to up to 1.20 FAR within the PD-TOC district shall follow the relevant processes set forth in Article XV of this chapter.

The maximum floor area ratio of development within the PD-TOC district shall be subject to the following standards: Properties within the PD-TOC shall be permitted to develop up to a maximum intensity of 0.70 FAR... The height of any structure shall not exceed 275 feet inclusive of parking levels.

up to the maximum floor area ratio of 0.7 if the O&LI standards are applied

The gross floor area devoted to dwellings as a secondary use shall not exceed 50 percent of the gross floor area of all principal uses in the development.

Maximum floor area ratio 1.5, which may be increased ... up to a maximum of 2.5

The intent of the PD-W district is to accept the Worldgate development as approved by Fairfax County into the town, including all uses and features approved by Fairfax County up to January 2, 2005.

Off-street parking and loading facilities and private streets shall be provided in conformance with the provisions of section 78-500...

Maximum floor area ratio 1.5, which may be increased ... up to a maximum of 2.5. Fifteen percent of the gross area shall be open space.

Driveways must be a minimum of 18 feet in length exclusive of the apron or sidewalk.

The intent of the PD-UR district is to encourage harmonious and creative new residential development that allows for a mix of housing types...

The minimum building height shall not be less than 60 feet and the maximum building height shall not exceed the following: ...