Municipality · California

Pasadena

The ordinance has been retrieved, read and turned into structured rules.
45
Districts
814
Extracted rules
3,831
Standards
9
Chapters read

Zoning districts

45 districts, grouped by category.

Residential

19
PD-17Residential

PD-17 - Rose Townhomes

Pasadena, CA
Min lot
5,000 sq ft
Max height
24 ft
Front setback
20 ft
Max density
12.9 du/ac
Permitted uses
2
PD-21Residential

PD-21 - Montgomery Engineering

Pasadena, CA
Max height
60 ft
Permitted uses
2
PD-22Residential

Lincoln Triangle Townhouse

Pasadena, CA
Front setback
20 ft
Permitted uses
4
PD-23Residential

Salvation Army

Pasadena, CA
Max height
45 ft
Front setback
15 ft
Permitted uses
1
PD-25Residential

Vista Del Arroyo Bungalows

Pasadena, CA
Max height
35 ft
Front setback
10 ft
Max density
10 du/ac
Permitted uses
9
PD-27Residential

King's Village

Pasadena, CA
Min lot
7,200 sq ft
Permitted uses
4
PD-28Residential

Community Arms

Pasadena, CA
PD-29Residential

Artisan Village

Pasadena, CA
Max height
36 ft
Front setback
20 ft
Permitted uses
4
PD-33Residential

Desiderio Homes

Pasadena, CA
Max height
23 ft
Permitted uses
1
PD-4Residential

Mountain Street Classics Townhomes

Pasadena, CA
Max height
36 ft
Front setback
20 ft
Permitted uses
9
PD-6Residential

Eaton Wash Residential

Pasadena, CA
Min lot
4,500 sq ft
Front setback
22 ft
Max density
4.9 du/ac
PD-9Residential

El Mirador

Pasadena, CA
Min lot
15,000 sq ft (0.34 ac)
Max height
20 ft
RM-12Residential
Pasadena, CA
Max density
5 du/ac
Permitted uses
9
RM-16Residential
Pasadena, CA
Max height
32 ft
Front setback
20 ft
Permitted uses
9
RM-32Residential

Multi-Family Residential (RM-32)

Pasadena, CA
Max height
3 ft
Front setback
20 ft
Permitted uses
10
RM-48Residential

Multi-Family Residential (RM-48)

Pasadena, CA
Max height
38 ft
Front setback
20 ft
Permitted uses
10
RM-87Residential
Pasadena, CA
Max density
17.43 du/ac
RS-1Residential
Pasadena, CA
Max height
100 ft
RS-6Residential
Pasadena, CA
Min lot
910 sq ft
Max height
72 ft
Max density
17.43 du/ac
Permitted uses
1

General provisions

769 rules that bind every district rather than one — sign regulations, parking, floodplain and the rest of the code’s citywide chapters.

17.48.110.F.22 standards

Signs may be attached to the face of an architectural projection, provided the sign does not exceed a maximum thickness of 10 inches as measured from the face of the sign to the outer face of the architectural projection and that the letters do not exceed a height of 24 inches.

17.48.110.F.42 standards

Signs may be placed below and may be supported by an architectural projection, provided the sign shall not exceed six feet in length and 16 inches in height.

17.48.110.H.41 standards

Signs shall be placed flat against the wall and shall not project from the wall more than required for normal construction purposes and in no case more than 12 inches.

17.48.110.H.51 standards

Signs shall be located within the middle 70 percent of the building or occupancy's frontage measured from lease line to lease line.

17.48.110.I.31 standards

Signs within three feet of a storefront window shall be counted as a window sign.

17.48.110.J.21 standards

A business that occupies a basement space with a direct exterior entrance from a sidewalk or alley shall be allowed one sign. The sign shall be placed near the main entrance. The maximum sign area shall be six square feet.

17.48.110.J.32 standards

Businesses that occupy spaces accessed only from an alley, arcade, courtyard, or mall or have similar limited visibility may be allowed up to two directory signs with a maximum area of six square feet each.

17.48.110.J.41 standards

The pole height shall not exceed the allowed height of the subject zoning district. A maximum of three flags shall be allowed per development site.

17.48.110.J.6.b2 standards

One freestanding sign, not to exceed 150 square feet in area, and eight feet in height shall be allowed.

17.48.110.J.6.c1 standards

The total area of all signs (including canopies) shall not exceed two square feet of sign area for each linear foot of street frontage.

17.48.110.J.84 standards

On-premises directional signs are limited to one double-faced sign per entrance. Each sign face shall not exceed three square feet in area and four feet in height. Letters or symbols shall not exceed five inches in height.

17.48.1154 standards

Noncommercial signs shall not exceed a cumulative total of 25 square feet per residential dwelling unit, and no single sign shall exceed 16 square feet.

17.48.115.C.12 standards

Noncommercial signs shall not exceed a cumulative total of 25 square feet per residential dwelling unit, and no single sign shall exceed 16 square feet.

17.48.115.C.21 standards

No sign shall exceed 10 feet in height measured from existing grade and shall not be located above the edge of the roof.

17.48.115.C.31 standards

Noncommercial signs shall be setback a minimum setback of 5 feet from the street property line.

17.48.1202 standards

combinations of permanent and temporary window signs shall not cover more than 25 percent of any window.

17.48.120.A1 standards

A Temporary Sign Permit, issued by the Department, shall be approved before the placement of a promotional temporary sign in CO, CD, CL, CG, and IG zoning districts as indicated in Table 4-22 (Temporary Signs), below.

17.48.120.A1 standards

The Zoning Administrator may approve a Temporary Sign Permit on an annual basis, which allows the applicant to tailor the duration and the number of days of the permit to meet the particular needs of the business as long as the total number of days in a calendar year does not exceed 90 days.

17.48.120.B1 standards

Temporary signs are allowed in addition to permanent signs allowed for the property. However, combinations of permanent and temporary window signs shall not cover more than 25 percent of any window.

17.48.1301 standards

The following signs are inconsistent with the purposes and standards of this Chapter and are prohibited in all zoning districts except where noted.

Source documents

The chapters of the adopted code that were retrieved, read and extracted from. Everything above traces back to one of these.