Dimensional standards
Lot
Height & bulk
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Grading
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of cutGrading (cut & fill)Reshaping land by removing earth (cut) or adding it (fill), often capped by volume. slopes20 ft
The height of cut slopes shall not exceed 20 feet.
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of fillGrading (cut & fill)Reshaping land by removing earth (cut) or adding it (fill), often capped by volume. slopes30 ft
The height of fill slopes shall not exceed 30 feet.
Noise
- Interior noise level below 45 dB45 dB
Street-facing windows of units shall be constructed with double-paned windows and/or other attenuation measures as needed to reduce interior noise below 45 decibels.
Other
- Noncombustible roofs required
All homes shall have noncombustible roofs.
- Preservation of riparian habitat
Specific attention shall be given to retaining and enhancing the existing riparian habitat in the upper canyon area.
From the ordinance
The average lot area (exclusive of the open space lot) shall be not less than 22,586 square feet, and no individual lot area may be less than 15,000 square feet. Lot width shall be not less than 100 feet at the front building line.