Dimensional standards
Servicing
- Applies near
- designated historicHistoric districtAn area where exterior changes need design review to protect its character. resource
- Geographic extent
- Sharing a property line with a designated historicHistoric districtAn area where exterior changes need design review to protect its character. resource
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Encroachment plane angle30 deg
Projects shall not be located within an encroachment plane sloping upward and inward at a 30-degree angle measured from the vertical, commencing 15 feet above the existing grade at the property line.
- Encroachment plane start heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.15 ft
Projects shall not be located within an encroachment plane sloping upward and inward at a 30-degree angle measured from the vertical, commencing 15 feet above the existing grade at the property line.
The minimum interior setback shall be equal to that of the historic resource or 15 feet, whichever is less.
- Stepback depth10 ft
A stepback with a minimum depth of 10 feet is required above this height, measured from the modified minimum street setback.
The minimum street setback shall be an average of the minimum setback set in Figure LPSP-12 and that of the resource for a minimum of 20 feet from the shared property line.
A maximum streetwall height shall not exceed the height of the historic resource for a minimum of 20 feet from the shared property line.
From the ordinance
Projects sharing a property line with a designated historic resource are subject to the following modified standards, illustrated in Figure LPSP-15.