22.354.060.D.2
Dimensional standards
Lot
Servicing
- Geographic extent
- Green Valley CSD boundary
Extracted standards
12 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Gated/walled subdivision prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
Gated or walled subdivisions are prohibited.
- Ground disturbance permit threshold400 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The requirements in this Subsection only apply to discretionary land-use permits... that include ground disturbance of over 400 square feet
- Local street paved width28 ft
Local streets shall use the inverted shoulder cross-section and shall have a paved width of 28 feet
- Underground utilities required
All wires and cables that provide utility services... shall be placed underground.
Signage
- Maximum monument sign area50 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
shall not display more than two sign faces with a maximum area of 50 square feet for each sign face.
- Maximum monument sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
the height of such signs shall be limited to six feet measured from the natural grade at the base of the sign
- Maximum ranch sign area20 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The maximum sign area for a residential ranch entrance sign shall be 20 square feet per sign face with a maximum of two sign faces permitted
- Maximum ranch sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.20 ft
The maximum height for a residential ranch entrance sign shall be 20 feet measured from the natural grade at the base of the sign
- Max temp real estate sign area (other)48 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
In all other zones, the maximum sign area for a temporary real estate sign shall be 48 square feet per sign face.
- Max temp real estate sign area (residential)6 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
In the Residential, Agricultural, Open Space, and Watershed Zones, the maximum sign area for a temporary real estate sign shall be six square feet per sign face.
- Maximum wall sign area ratio1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. per linear foot of building frontageFrontageThe length of a lot line that touches a public street.
Each business establishment... shall be permitted a maximum of one square foot of wall sign area for each one linear foot of building frontage.
Outdoor Advertising Signs (Billboards), Roof Signs, Pole Signs, Internally Illuminated Signs are prohibited.
From the ordinance
New lots shall have a minimum of 2.5 gross acres.