Los Angeles County Unincorporated, California · General provision

22.302.080

Dimensional standards

lot requirementsSTREETbuildable areaFront 50 ftRear 50 ftSide 35 ftMin width 165 ftMin depth 165 ftMIN LOT AREA2 acMAX HEIGHT35 ftMAX IMPERVIOUS10%
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Extracted standards

31 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Fencing & walls

  • Minimum non-view-obscuring fence area70 pct

    Except where otherwise required by this CSD, at least 70 percent of the entire fence area shall be non-view-obscuring; no slats or other view-obscuring materials may be inserted into or affixed to such fences.

  • Perimeter fence style

    Only split rail, open wood, wire, or wrought iron style or similar open-type perimeter fences shall be permitted, except on residential lots of less than 10,000 square feet, or unless view-obscuring fences are required for visual shielding by other provisions of this Title 22;

Height

Lighting

  • Outdoor lighting style

    Where outdoor lights are required, light fixtures in keeping with the Western frontier architectural style will be required.

Other

Signage

From the ordinance

New residential lots shall contain a gross area of not less than two acres and a net area of not less than 40,000 square feet. ... New and existing residential lots of sufficient size shall have required front and rear yards of not less than 50 feet from the property line. Side yards shall be a minimum of 35 feet from the property line.
22.302.080