22.358.060
Dimensional standards
Lot
Servicing
- Geographic extent
- Three Points — Liebre Mountain CSD boundary
Extracted standards
13 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Gated or walled subdivisions prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
Gated or walled subdivisions are prohibited.
- Ground-mounted solar setbackSetbackThe distance a building must be held back from a lot line.5 ft
Ground-mounted small-scale solar energy systems shall be placed at least five feet from the nearest property line.
- Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built. for new lots20 acresacre43,560 square feet — about the size of an American football field without the end zones.
New lots shall have a minimum area of 20 gross acres.
- Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built. for density-controlled developments10 acresacre43,560 square feet — about the size of an American football field without the end zones.
For density-controlled developments (Section 22.140.170), lots shall be a minimum of 10 gross acres in size.
- Utilities underground
All wires and cables that provide utility services, including telephone, television, electricity less than 10 kilovolts, and similar services shall be placed underground.
- Vegetation conservation buffer depth30 ft
a vegetation conservation buffer with a depth of not less than 30 feet shall be established and maintained along the boundary of a lot bordering upon a public street or a private street or right-of-way.
- Vegetation removal requiring CUP
Removal or destruction of vegetation of any kind shall require an approved Conditional Use Permit where the area of removal or destruction is greater than 30 percent of the gross area of the lot or 30,000 square feet, whichever is more restrictive.
Signage
- Monument sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
the height of such signs shall be limited to six feet measured from the natural grade at the base of the sign
- Monument sign maximum area per face50 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
shall not display more than two sign faces with a maximum area of 50 square feet for each sign face.
Outdoor Advertising Signs (Billboards); Roof Signs; Pole Signs; and Internally illuminated signs.
- Residential ranch entrance sign
Residential ranch entrance signs shall only be permitted on lots of at least one acre in size and located in the Residential or Agricultural Zone; maximum one sign; max 20 sq ft per face; max 2 faces; max height 20 ft.
- Temporary real estate sign area6 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
In the Residential, Agricultural, Open Space, and Watershed Zones, the maximum sign area for a temporary real estate sign shall be six square feet per sign face. In all other zones, the maximum sign area shall be 12 square feet per sign face.
- Wall business sign area1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. per linear foot
Each business establishment fronting on and/or oriented toward one or more public street, highway, or parkway shall be permitted a maximum of one square foot of wall sign area for each one linear foot of building frontage.
From the ordinance
Prohibited signs: Outdoor Advertising Signs (Billboards); Roof Signs; Pole Signs; and Internally illuminated signs.