Los Angeles County Unincorporated, California · General provision
Section 22.322.080
Dimensional standards
Servicing
- Geographic extent
- Baldwin Hills Community Standards DistrictZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. - oil field portion
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Grading
- Maximum slope gradient for cuts and fills2 ratio (2:1)
No slope of cut or fill shall have a gradient steeper than two to one (2:1), unless specifically approved by a site-specific geotechnical report.
Other
- Drilling setbackSetbackThe distance a building must be held back from a lot line. from developed areas400 ft
At least 400 feet from developed areas; and at least 20 feet from any public roadway.
- Drilling setbackSetbackThe distance a building must be held back from a lot line. from public roadway20 ft
At least 20 feet from any public roadway.
- ProhibitedProhibitedNot allowed in the district at all, short of rezoning or a variance. areas for surface drilling
No surface drilling or other surface oil operations shall be allowed within the portions of this CSD consisting of the Southern California Edison facility, the Holy Cross Cemetery, and the small noncontiguous lot located east of La Brea Avenue.
- Steam drive plant setbackSetbackThe distance a building must be held back from a lot line. from developed area1,000 ft
The steam drive plant, if constructed, shall be located at least 1,000 feet from a developed area...
From the ordinance
No surface drilling or other surface oil operations shall be allowed within the portions of this CSD consisting of the Southern California Edison facility, the Holy Cross Cemetery, and the small noncontiguous lot located east of La Brea Avenue.