22.174.070
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Fencing & walls
- Oak tree protection fence heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.4 ft
The installation of chain link fencing not less than four feet in height around the protected zone of oak trees shown on the site plan.
Other
- Oak tree excavation distance15 ft
Any excavation or grading allowed within the protected zone or within 15 feet of the trunk of an oak tree, whichever distance is greater, be limited to hand tools or small hand-power equipment.
- Replacement tree maintenance period2 years
Replacement oak trees shall be properly cared for and maintained for a period of two years and replaced by the permittee if mortality occurs within that period.
- Oak tree replacement ratio2 to 1
Required replacement oak trees shall consist exclusively of indigenous oak trees and shall be in the ratio of at least two to one.
- Minimum replacement tree size15 gallon
Each replacement oak tree shall be at least a 15-gallon size specimen and measure at least one inch in diameter one foot above the base.
From the ordinance
Required replacement oak trees shall consist exclusively of indigenous oak trees and shall be in the ratio of at least two to one. Each replacement oak tree shall be at least a 15-gallon size specimen and measure at least one inch in diameter one foot above the base. The installation of chain link fencing not less than four feet in height around the protected zone of oak trees shown on the site plan. Any excavation or grading allowed within the protected zone or within 15 feet of the trunk of an oak tree, whichever distance is greater, be limited to hand tools or small hand-power equipment.