22.114.220
Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Subdivision directional sign clearance8 ft
An unobstructed open space shall be maintained to a height of eight feet below the sign except for structural supports.
- Subdivision directional sign double face separation24 in
Where the distance between the faces of a double-faced sign is more than 24 inches, such faces shall be considered two separate signs.
- Subdivision directional sign maximum area180 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
and shall not have an area in excess of 180 square feet per face.
- Subdivision directional sign maximum count4 signs
Not more than four single- or double-faced signs pertaining to the same subdivision development may be used at the same time.
- Subdivision directional sign maximum dimension20 ft
Such signs shall not exceed a height or width in excess of 20 feet
- Subdivision directional sign maximum distance4 miles
Such signs shall be used and located within four miles from the exterior boundary of the subdivision development to which they relate.
- Subdivision directional sign minimum separation500 ft
The sign shall be located not less than 500 feet from any other subdivision directional sign.
From the ordinance
Subdivision directional signs are permitted in Zones A-1, A-2, C-1, C-H, C-R, R-1, R-2, R-3, R-4, R-A, and R-R, in accordance with this Section.