22.114.220
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum subdivision directional sign area180 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Such signs shall not exceed a height or width in excess of 20 feet and shall not have an area in excess of 180 square feet per face.
- Subdivision directional sign clearance8 ft
An unobstructed open space shall be maintained to a height of eight feet below the sign except for structural supports.
- Maximum distance from subdivision4 miles
Such signs shall be used and located within four miles from the exterior boundary of the subdivision development to which they relate.
- Maximum number of subdivision directional signs4 signs
Not more than four single- or double-faced signs pertaining to the same subdivision development may be used at the same time.
- Maximum subdivision directional sign size20 ft
Such signs shall not exceed a height or width in excess of 20 feet and shall not have an area in excess of 180 square feet per face.
- Minimum spacing between subdivision directional signs500 ft
The sign shall be located not less than 500 feet from any other subdivision directional sign.
From the ordinance
Subdivision directional signs are permitted in Zones A-1, A-2, C-1, C-H, C-R, R-1, R-2, R-3, R-4, R-A, and R-R, in accordance with this Section.