Dimensional standards
Servicing
- Geographic extent
- Applies to parcels abutting a street in B-1, B-2, B-4, I-1, I-2, or I-A zoning districts
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Minimum street buffer width for corner lots with utility easement15 ft
For corner lots where a utility easement is required, the buffer area shall have a minimum width of 15 feet.
- Minimum street buffer width15 ft
The buffer areas shall have a minimum width of 15 feet, measured perpendicular from the street right-of-way, except as required in section 130-218(2).
- Minimum street buffer width with utility easement20 ft
The buffer area shall have a minimum width of 20 feet where a utility easement is required, except for corner lots.
- ProhibitedProhibitedNot allowed in the district at all, short of rezoning or a variance. structures in buffer
There shall be no structures, off-street parking areas, or travelways within buffer areas except for structures for public utilities, driveways, or sidewalks providing perpendicular access to the lot from a street, and freestanding signs not to exceed ten feet in height.
- Utility easement width within buffer10 ft
The utility easement shall be contiguous to the street right-of-way and shall constitute the first ten feet of the buffer area.
Signage
- Maximum freestanding sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. in buffer10 ft
freestanding signs not to exceed ten feet in height.
From the ordinance
When a parcel abuts a street and is located in a B-1, B-2, B-4, I-1, I-2, or I-A zoning districts, a landscaped buffer area shall be provided contiguous to any street right-of-way. ... minimum width of 15 feet ...