County (unincorporated) · California

Riverside County Unincorporated

This locality is on the roster but its ordinance has not been retrieved yet.
61
Districts
449
Extracted rules
1,534
Standards
72
Chapters read
Zoning snapshotNot yet acquired

Zoning districts

61 districts, grouped by category.

Residential

36
PA-15Residential

Planning Area 15

Riverside County Unincorporated, CA
PA-17Residential

Planning Area 17 of Specific Plan No. 342

Riverside County Unincorporated, CA
Min lot
2,800 sq ft
Max height
55 ft
Front setback
10 ft
Permitted uses
17
PA-19Residential

Planning Area 19

Riverside County Unincorporated, CA
PA-20Residential

Planning Area 20 of Specific Plan No. 342

Riverside County Unincorporated, CA
Min lot
2,800 sq ft
Max height
55 ft
Front setback
10 ft
Permitted uses
28
PA-24Residential

Planning Area 24, Specific Plan No. 260

Riverside County Unincorporated, CA
Min lot
5,000 sq ft
Front setback
12 ft
PA-25Residential

Planning Area 25, Specific Plan No. 260

Riverside County Unincorporated, CA
Min lot
3,500 sq ft
Front setback
12 ft
PA-28Residential

Planning Area 28 - Attached Multiple Family Residential and Combined Multiple Family Residential/Non-Residential Development

Riverside County Unincorporated, CA
Min lot
2,800 sq ft
Max height
55 ft
Front setback
10 ft
PA-31Residential

Planning Area 31

Riverside County Unincorporated, CA
Min lot
5,000 sq ft
Front setback
15 ft
PA-32Residential

Planning Areas 32 and 33B

Riverside County Unincorporated, CA
Min lot
5,000 sq ft
Front setback
15 ft
PA-33AResidential

Planning Area 33A

Riverside County Unincorporated, CA
Min lot
6,000 sq ft
Front setback
12 ft
PA-34Residential

Planning Area 34

Riverside County Unincorporated, CA
Min lot
5,000 sq ft
Front setback
12 ft
PA-35Residential

Planning Areas 35, 37 and 40

Riverside County Unincorporated, CA
Min lot
6,000 sq ft
Front setback
12 ft
PA-36Residential

Planning Area 36, Specific Plan No. 260

Riverside County Unincorporated, CA
Min lot
10,000 sq ft
PA-38Residential

Planning Area 38

Riverside County Unincorporated, CA
Min lot
6,000 sq ft
Front setback
12 ft
PA-39Residential

Planning Area 39

Riverside County Unincorporated, CA
Min lot
5,000 sq ft
Front setback
12 ft
Permitted uses
1
PA-41Residential

Planning Areas 41, 42, 45 and 46

Riverside County Unincorporated, CA
Min lot
5,000 sq ft
Front setback
12 ft
PA-50CResidential

Planning Area 50C

Riverside County Unincorporated, CA
Min lot
4,500 sq ft
Max height
35 ft
Front setback
15 ft
Permitted uses
3
PA-52Residential

Planning Area 52

Riverside County Unincorporated, CA
Max height
35 ft
Front setback
15 ft
Permitted uses
3
PA-52AResidential

Planning Area 52A

Riverside County Unincorporated, CA
Min lot
6,000 sq ft
Max height
35 ft
Front setback
15 ft
Permitted uses
2
PA-58Residential

Planning Area 58

Riverside County Unincorporated, CA
Min lot
4,000 sq ft
Max height
35 ft
Front setback
15 ft
Permitted uses
1
R-1Residential

R-1 One-Family Dwelling Zone

Riverside County Unincorporated, CA
Min lot
7,200 sq ft
Max height
40 ft
Permitted uses
18
R-1Residential

One-Family Dwelling Zone

Riverside County Unincorporated, CA
Max height
35 ft
R-1AResidential

R-1A One-Family Dwellings, Mountain Resort Zone

Riverside County Unincorporated, CA
Min lot
7,200 sq ft
Max height
40 ft
Front setback
20 ft
Permitted uses
16
R-1AResidential
Riverside County Unincorporated, CA
Front setback
20 ft
R-2Residential

Multiple-Family Dwelling Zone

Riverside County Unincorporated, CA
Min lot
7,200 sq ft
Max height
40 ft
Front setback
20 ft
Permitted uses
34
R-2Residential

Multiple-Family Dwelling Zone

Riverside County Unincorporated, CA
Max height
35 ft
R-2AResidential

R-2A LIMITED MULTIPLE-FAMILY DWELLING ZONE

Riverside County Unincorporated, CA
Min lot
7,200 sq ft
Max height
30 ft
Permitted uses
19
R-3Residential

General Residential Zone

Riverside County Unincorporated, CA
Min lot
7,200 sq ft
Max height
50 ft
Front setback
10 ft
Permitted uses
25
R-3AResidential

Village Tourist Residential Zone

Riverside County Unincorporated, CA
Min lot
9,000 sq ft
Max density
20 du/ac
Permitted uses
39
R-4Residential

Planned Residential Zone

Riverside County Unincorporated, CA
Min lot
3,500 sq ft
Max height
50 ft
Front setback
20 ft
Max density
7.26 du/ac
Permitted uses
9
R-5Residential

R-5 Open Area Combining Zone, Residential Developments

Riverside County Unincorporated, CA
Max height
50 ft
Front setback
50 ft
Permitted uses
9
R-6Residential

R-6 Residential Incentive Zone

Riverside County Unincorporated, CA
Min lot
5,000 sq ft
Max height
35 ft
Front setback
10 ft
Max density
4 du/ac
Permitted uses
2
R-7Residential

R-7 Zone Highest Density Residential

Riverside County Unincorporated, CA
Max height
75 ft
Front setback
0 ft
Permitted uses
17
SP-266Residential

Specific Plan No. 266, Planning Area 23b

Riverside County Unincorporated, CA
Front setback
5 ft
SP-342Residential

Specific Plan No. 342

Riverside County Unincorporated, CA
Min lot
2,000 sq ft
Max height
45 ft
Front setback
5 ft
Permitted uses
4
SP-386Residential

Specific Plan No. 386

Riverside County Unincorporated, CA
Min lot
4,500 sq ft
Max height
26 ft
Front setback
30 ft
Permitted uses
3

General provisions

388 rules that bind every district rather than one — sign regulations, parking, floodplain and the rest of the code’s citywide chapters.

17.148.01011 standards

Uses permitted: One-family dwellings; field crops; home occupations; etc.

17.152.0106 standards

The following uses are permitted, upon approval of a plot plan pursuant to Chapter 17.216, on parcels of land not less than seven thousand two hundred (7,200) square feet in size, with a minimum front yard depth of twenty (20) feet and minimum side and rear yard depth of ten (10) feet

17.16.02027 standards

One-family residences shall not exceed forty (40) feet in height. No other building or structure shall exceed fifty (50) feet in height... One-half acre, with a minimum average width of eighty (80) feet...

17.172.070

No dwelling shall be constructed unless it has a minimum floor living area of not less than seven hundred fifty (750) square feet.

17.172.0804 standards

Each required loading space shall be paved with six inches of concrete over a suitable base and shall not be less than ten (10) feet wide, thirty-five (35) feet long and fourteen (14) feet high...

17.172.1306 standards

The building height of a detached accessory building or structure shall not exceed two stories or forty (40) feet...

17.172.1405 standards

Where yards are required by this title, they shall be open and unobstructed from the ground to the sky and kept free of all structural encroachments, except as follows...

17.172.1406 standards

Outside stairways or landing places, if unroofed and unenclosed, may extend into a required side yard for a distance of not to exceed three feet and/or into the required rear yard a distance of not to exceed five feet.

17.172.1501 standards

Structures necessary for the maintenance and operation of a building and flagpoles, chimneys or similar structures that exceed the prescribed height limits may exceed the prescribed height limits where such structures do not provide additional floor space.

17.172.1601 standards

On through lots, either lot line separating such lot from a street may be designated as the front lot line. In such cases, the minimum rear yard shall not be less than a required front yard in the zone in which such lot is located.

17.172.1701 standards

Any lot shown upon an official subdivision map or record of survey map duly approved and recorded or any lot for which a bona fide deed has been used as a building site, provided the required yard setbacks are maintained.

17.172.2002 standards

Private swimming pools... shall be located not nearer than five feet to any property line or dwelling.

17.172.2002 standards

Private swimming pools for the use of the occupants of the premises and their nonpaying guests shall be located not nearer than five feet to any property line or dwelling. All other swimming pools shall be located not nearer than ten (10) feet from any property line or building.

17.172.2051 standards

Fences shall not be constructed of garage doors, tires, pallets or other materials not typically used for the construction of fences.

17.172.2051 standards

Fences shall not be constructed of garage doors, tires, pallets or other materials not typically used for the construction of fences.

17.172.2201 standards

The planning director may approve, conditionally approve or deny: Setback adjustments: modifications of the front, rear or side yard minimum setback requirements of the various zone classifications in this title.

17.172.2301 standards

When any zone classification provides that an application for a greater height limit may be made pursuant to this section, the following alternative procedures may be used to determine if the request shall be granted.

17.172.2401 standards

When an asterisk or any other character follows the zoning symbol on any official zoning plan map, the required minimum lot area, minimum area per dwelling unit, lot frontage, size of dwelling, yard requirement, and structure height, or any of such requirements, for the areas upon the map so marked, shall be as set forth in the legend upon such map.

17.172.2502 standards

Fences not exceeding thirty (30) inches in height; ... signs not exceeding one hundred (100) square feet in display area per face...

17.172.2502 standards

No building, structure or other improvement shall be constructed within the described planned right-of-way lines... The following improvements shall be permitted... Fences not exceeding thirty (30) inches in height; ... signs not exceeding one hundred (100) square feet in display area per face...

Source documents

The chapters of the adopted code that were retrieved, read and extracted from. Everything above traces back to one of these.