Sec. 25-462(12)
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum size100 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Wall signs are permitted for one (1) square foot per linear foot of building frontage on which the sign or signs are to be attached, up to a maximum aggregate of one hundred (100) square feet
- Multi-tenant exception100 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Each tenant located within a multi-tenant building shall be allowed one (1) square foot of sign area per linear foot of their tenant building frontage, up to a maximum of one hundred (100) square feet.
- Multiple buildings exception100 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Parcels that contain multiple principal buildings shall be allowed one (1) square foot of sign area per linear foot of building frontage, up to a maximum of one hundred (100) square feet per building.
- No covering architectural features
No wall sign shall cover, cross or otherwise hide columns, belt courses or other decorative architectural features of a building, including balconies.
From the ordinance
Wall/marquee. No wall sign shall cover, cross or otherwise hide columns, belt courses or other decorative architectural features of a building, including balconies. Wall signs are permitted for one (1) square foot per linear foot of building frontage on which the sign or signs are to be attached, up to a maximum aggregate of one hundred (100) square feet, except for the following: a. Each tenant located within a multi-tenant building shall be allowed one (1) square foot of sign area per linear foot of their tenant building frontage, up to a maximum of one hundred (100) square feet. Such signage shall not be limited to the maximum allowable sign area for the parcel as listed in section 25-462(a). b. Parcels that contain multiple principal buildings shall be allowed one (1) square foot of sign area per linear foot of building frontage, up to a maximum of one hundred (100) square feet per building. Such signage shall not be limited to the maximum allowable sign area for the parcel as listed in section 25-462(a).