R-2
Dimensional standards
Lot
Density
Height & bulk
Uses
Permitted by right1
Conditional / special use3
Accessory1
Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
at least 25 feet in width and three feet in height
- Buffer width25 ft
landscaped or wooded buffer ... at least 25 feet in width and three feet in height
- Minimum accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. building setbackSetbackThe distance a building must be held back from a lot line. from property line10 ft
no accessory building will be closer than ten feet from any property line of the project
- Minimum distance between manufactured/mobile homesManufactured homeA dwelling built in a factory to a federal standard and transported to the site.25 ft
No manufactured/mobile home shall be placed within 25 feet of another
- Minimum distance from districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. boundary25 ft
No manufactured/mobile home shall be placed less than 25 feet from the R-2 district boundary.
- Minimum distance from interior streets15 ft
No manufactured/mobile home shall be placed less than 15 feet from any interior streets, walkways or common areas.
- Minimum recreation area10,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
not less than one multiple purpose developed recreational area of at least 10,000 square feet
- Skirting required
Each manufactured/mobile home ... shall have approved skirting around its perimeter
From the ordinance
Structures to be erected or land to be used shall be for one or more of the following uses: 1. Manufactured/mobile home park, major. ... Density not more than four per gross acre. ... Minimum lot size 6,000 sq ft. ... Two off-street parking spaces per lot.