Surry County Unincorporated
Zoning districts
11 districts, grouped by category.
Agricultural
1Commercial
4Local Business District
- Max height
- 20 ft
General Business District
- Max height
- 30 ft
Commercial District
- Min lot
- 40,000 sq ft (0.92 ac)
- Max height
- 45 ft
- Front setback
- 50 ft
- Permitted uses
- 45
General Commercial District
- Min lot
- 40,000 sq ft (0.92 ac)
- Max height
- 45 ft
- Front setback
- 50 ft
- Permitted uses
- 63
Industrial
4Light Industrial District
- Min lot
- 30,000 sq ft (0.69 ac)
- Max height
- 75 ft
- Front setback
- 50 ft
- Permitted uses
- 29
Heavy Industrial District
- Min lot
- 40,000 sq ft (0.92 ac)
- Max height
- 75 ft
- Front setback
- 50 ft
- Permitted uses
- 34
Light Industrial District
- Max height
- 30 ft
- Front setback
- 75 ft
Heavy Industrial District
- Max height
- 30 ft
- Front setback
- 75 ft
General provisions
215 rules that bind every district rather than one — sign regulations, parking, floodplain and the rest of the code’s citywide chapters.
For the purpose of these regulations a loading space is a space within the main building or on the same lot, providing for the standing, loading, or unloading of trucks, having minimum area of 540 square feet, minimum width of 12 feet, a minimum depth of 35 feet, and a vertical clearance of at least 15 feet.
Each stacking space shall be a minimum of ten feet by 20 feet.
Stacking spaces shall be provided for any use having a drive-through facility or areas having drop-off and pick-up areas. The following general standards shall apply to all stacking spaces and drive-through facilities...
Where buffer yards are required by this ordinance, the following shall apply: The required buffer yard shall be located entirely on property of the more intensive use... The maximum slope of any required buffer yard shall be 2:1.
The maximum slope of any required buffer yard shall be 2:1. ... Required evergreen shrubs shall have a minimum height of 18 inches at the time of planting.
A Type A buffer yard shall only be required for all commercial and industrial use types when a single-family residence is located on an adjacent lot within 100 feet of the property boundary. Required large deciduous trees shall have a minimum caliper of one inch at the time of planting. These trees shall have an ultimate height of not less than 50 feet at maturity. One tree shall be planted for each 30 linear feet of buffer yard.
No sign, unless herein excepted, shall be erected, constructed, posted, painted, altered, maintained, or relocated, except as otherwise provided in this article, until a permit has been issued by the administrator. ... Pennants, banners, streamers, wind-sail signs and all other fluttering spinning or similar type signs and advertising devices. ... Any flashing signs. ...
No sign shall be erected without a permit... Prohibited signs include pennants, flashing signs, roof signs... Exempt signs include name plates (2 sq ft), noncommercial signs (32 sq ft), real estate signs (residential 4 sq ft, commercial 32 sq ft)... Off-premises signs limited to 288 sq ft.
A sign, limited in area to 12 square feet, advertising products raised or made on the premises. A sign, limited in area to 12 square feet, for identification of a farm or estate or a subdivision or its occupants. A sign, limited in area to 32 square feet, for a church bulletin board or identification of permitted public or semi-public uses, wildlife reservations, recreational uses, or clubs.
Signs in the AR district: products raised on premises (12 sq ft), farm identification (12 sq ft), church bulletin (32 sq ft), temporary direction (32 sq ft).
A sign, limited in area to 32 square feet, for a church bulletin board or identification of permitted public or semi-public uses, wildlife reservations, recreational uses, or clubs. ... Projecting signs, if there are no marquee or detached signs, one for each business on the premises, with sign area limited to 12 square feet.
Signs in the RVC district: church bulletin (32 sq ft), temporary direction (32 sq ft), projecting signs (12 sq ft).
Off-premises signs shall only be permitted in commercial or industrial districts. Such signs shall be limited in area to no more than 288 square feet. Digital display, or rotating or any other displays that change messages shall be prohibited.
The intensity at adjoining streets or residential properties shall not exceed 0.5 foot candles. No lighting fixture pole shall exceed a height of 15 feet in an R-1 or R-2 Residence District or 30 feet in a B-1 or B-2 Local Business District.
All exterior lighting fixtures shall be designed, located and arranged so as not to direct glare on adjoining streets or residential properties. The intensity at adjoining streets or residential properties shall not exceed 0.5 foot candles. No lighting fixture pole shall exceed a height of 15 feet in an R-1 or R-2 Residence District or 30 feet in a B-1 or B-2 Local Business District.
Source documents
The chapters of the adopted code that were retrieved, read and extracted from. Everything above traces back to one of these.