§ 18.142.030(6)
Dimensional standards
Density
Height & bulk
Housing
- Two-family
- by_right
- Three-family
- by_right
- Four-plus family
- by_right
Servicing
- Applies near
- Dyer Mountain
- Geographic extent
- Vicinity of Dyer Mountain and southwestern portion of Mountain Meadows Reservoir
Uses
Permitted by right22
- single family residential
- multi-family residential
- lodges/clubs
- hotels
- inns
- condominiums
- alpine skiing
- Nordic skiing
- golf
- fishing
- marinas/water based sports
- campgrounds
- recreational vehicle parks
- conference facilities
- restaurants
- retail stores
- related businesses
- timber production and harvesting
- offices
- community facilities
- recreational trails
- outdoor recreation (ski facilities, golf courses, tennis facilities, stables/pastures)
Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Density
- Multi-familyMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive. density range20 du/acdu/acreDwelling units per acre — the number of homes allowed on each acre of land.
For multifamily residential, building intensity may range from 2 to 20 units per acre.
- Single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. density range7.25 du/acdu/acreDwelling units per acre — the number of homes allowed on each acre of land.
For single family residential, building intensity may range from 0.02 to 7.25 dwelling units (DUA) per acre.
Design
- Mixed-use village or town center plan required
Land uses shall be planned and implemented through a mixed-use village or town center plan.
Other
At least 60% of land designated as Mountain Resort, exclusive of open bodies of water, shall be devoted to open space uses.
- Non-residential maximum FARFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot.1 ratio
For non-residential uses, building intensity may not exceed a floor-area-ratio of 1.00.
- Residential and mixed-use maximum FARFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot.3 ratio
Residential and mixed use buildings may not exceed a floor-area-ratio of 3.0.
- Sewer treatment option
The property designated Mountain Resort on Dyer Mountain may utilize its own treatment facility, or may connect to the Westwood system.
From the ordinance
For single family residential, building intensity may range from 0.02 to 7.25 dwelling units (DUA) per acre... For multifamily residential, building intensity may range from 2 to 20 units per acre.