Dimensional standards
Servicing
- Applies near
- residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.
- Applies within
- 100 ft
- Geographic extent
- Car washes must be located at least 100 feet from any residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. or use.
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Grease and oil separator
An appropriately sized and designed in-ground grease and oil separator device shall be installed on-site and properly maintained to prevent grease and oil entry into the wastewater system.
- Minimum water reclamation70 pct
An automatic water reclamation system shall be used to recover a minimum of 70 percent of the car wash rinse water for reuse.
Other
- Minimum distance from residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.100 ft
Buildings, structures, and vacuuming facilities shall be a minimum of 100 feet from any residential district or use.
No sales, repair, or outside storage of motor vehicles shall be conducted on the site.
From the ordinance
Car washes shall be located and designed so that vehicular circulation does not conflict with traffic movements and pedestrian access within adjacent streets, service drives, and/or parking areas. Buildings, structures, and vacuuming facilities shall be a minimum of 100 feet from any residential district or use.