Dimensional standards
Servicing
- Geographic extent
- Limited Professional DistrictZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. LP
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Minimum clear passage between sign and curb4 ft
Signs must be placed to maintain at least four feet of clear passage between the edge of the sign and the curb
- A-frame sign may only be displayed during business hours
The sign may only be displayed during business hours.
- Maximum A-frame sign area12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
These signs must not be more than an aggregate of 12 square feet or less in an a-frame design
- Only one A-frame sign per business or per 30 linear feet of sidewalk, whichever more restrictive1 sign
Only one such sign is permitted per business, or one sign per 30 linear feet of sidewalk, whichever is more restrictive.
From the ordinance
A-frame signs in B-1 and LP Zoning Districts. These signs must not be more than an aggregate of 12 square feet or less in an a-frame design as defined herein. The sign may only be displayed during business hours. The placement of the sign shall not impede pedestrian, wheelchair, or vehicular traffic flow. Signs must be placed to maintain at least four feet of clear passage between the edge of the sign and the curb and should not otherwise compromise public safety. Only one such sign is permitted per business, or one sign per 30 linear feet of sidewalk, whichever is more restrictive.