Dimensional standards
Lot
Density
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- AccessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. structure setbackSetbackThe distance a building must be held back from a lot line. from boundary100 ft
Accessory structures or recreation facilities... in no case closer than 100 feet to any campground boundary.
- AccessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. structure setbackSetbackThe distance a building must be held back from a lot line. from R-1/R-2200 ft
or closer than 200 feet to any lot in an R-1 or R-2 Residence District.
- Internal drive width10 ft
Internal access drives shall be of adequate width for internal traffic, hard surfaced and maintained at least ten feet in width.
- Maximum stay30 nights
No campground guests shall stay more than 30 consecutive nights in any one visit.
- Minimum campsite area3,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Minimum campsite area = 3,000 square feet.
From the ordinance
Minimum lot size = Five acres. Maximum density of campsites = 12 units per acre. Minimum campsite area = 3,000 square feet.