Dimensional standards
Lot
Density
Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- SetbackSetbackThe distance a building must be held back from a lot line. from campground boundary100 ft
in no case closer than 100 feet to any campground boundary
- SetbackSetbackThe distance a building must be held back from a lot line. from R-1/R-2 lot200 ft
or closer than 200 feet to any lot in an R-1 or R-2 Residence District.
- Internal drive width10 ft
Internal access drives shall be of adequate width for internal traffic, hard surfaced and maintained at least ten feet in width
- Maximum density of campsites12 campsites/acreacre43,560 square feet — about the size of an American football field without the end zones.
Maximum density of campsites = 12 units per acre.
- Maximum consecutive nights30 nights
No campground guests shall stay more than 30 consecutive nights in any one visit.
- Minimum campsite area3,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Minimum campsite area = 3,000 square feet.
- Minimum lot size5 acresacre43,560 square feet — about the size of an American football field without the end zones.
Minimum lot size = Five acres.
From the ordinance
Minimum lot size = Five acres.