zoneoptics
Richmond, Virginia · General provision

Sec. 30-691.2(4)

All Richmond districts0

Dimensional standards

Height & bulk

Maximum floor area ratioFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot.
10

Servicing

Geographic extent
B-4 districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.

Extracted standards

1 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Dwelling use floor area bonus10 pct

    The maximum permitted floor area applicable to dwelling use shall be increased by up to ten percent, provided that not less than six percent of the total dwelling use floor area, including the optional floor area increase, is devoted to affordable dwelling units.

From the ordinance

The maximum permitted floor area applicable to dwelling use shall be increased by up to ten percent, provided that not less than six percent of the total dwelling use floor area, including the optional floor area increase, is devoted to affordable dwelling units.
Sec. 30-691.2(4)