Sec. 48-1134

Other

• Planning commission approval required if new gross floor area exceeds 50% of existing50 pct

  Approval by the planning commission shall be required where new gross floor area exceeds 50 percent of the existing floor area or exceeds 1,500 square feet.

• Planning commission approval required if new gross floor area exceeds 1,500 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.1,500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  or exceeds 1,500 square feet

• Site plan not required for exclusively residential development in T-1 on lot <=6,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.6,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  exclusively residential development occurring in the T-1 district on a lot that is 6,000 square feet in area or less

• Site plan not required for one-family/two-family detached dwellings in R-1A and R-1B

  a site plan is not required for: (i) the construction of one-family or two-family detached dwellings and their accessory structures in the R-1A and R-1B districts

• Site plan approval expires after 1 year1 year

  Approval by the planning commission of a site plan submitted under the provisions of this division shall expire one year after the date of such approval

• Site plan required for land disturbance over 2,500 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.2,500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  Any disturbance of land exceeding 2,500 square feet

• Site plan required for structural additions over 25 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.25 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  Involves structural additions of more than 25 square feet of floor area.