Dimensional standards
Lot
Uses
Conditional / special use1
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Bypass lane minimum width10 ft
A by-pass lane shall be provided adjacent to the drive-through lane or lanes, with a minimum width of ten feet.
- Minimum distance from intersection to curb cutGrading (cut & fill)Reshaping land by removing earth (cut) or adding it (fill), often capped by volume.150 ft
The distance between a public street intersection and a curb cut providing access to or from a parcel with a drive-through shall be a minimum of 150 feet.
- SetbackSetbackThe distance a building must be held back from a lot line. from residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. or park50 ft
Where such a vehicle stacking lane, including the required buffer for the lane, abuts a residential zoning district or park, the window, service area, or vehicular stacking lane shall be set back at least 50 feet from the property boundary abutting the residential district or park.
- Minimum street frontageFrontageThe length of a lot line that touches a public street. for drive-through200 ft
with a minimum street frontage of not less than 200 feet
- Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built. for drive-through43,560 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The minimum lot area for a building with a drive-through window shall be no less than one acre (43,560 square feet)
From the ordinance
The minimum lot area for a building with a drive-through window shall be no less than one acre (43,560 square feet), with a minimum street frontage of not less than 200 feet. A drive-through business window, service area, or vehicle stacking lane shall not be located within a required front, side or rear yard setback area...