Dimensional standards
Lot
Uses
Permitted by right5
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Pedestrian-friendly features on Broad and Washington Streets
Buildings that front on Broad Street and Washington Street shall contain the following pedestrian-friendly features: direct access to pedestrian ways, seating, landscaping, lighting, architectural details, large first floor display windows.
Other
- Maximum perimeter building setbackSetbackThe distance a building must be held back from a lot line.20 ft
and a maximum project area perimeter-building setback of 20 feet.
- SetbackSetbackThe distance a building must be held back from a lot line. when adjoining R districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.20 ft
The 14-foot minimum setback requirement does not apply when the perimeter of a MUR project adjoins an R district, in which case the setback shall be no less than 20 feet.
Parking
- Parking reduction for alternative transportation20 pct
Applicants may request from the planning commission, during the site plan process, a consideration for a reduction in the parking requirements of division 2 of this article of up to 20 percent for reduced parking demands due to the use of or incentives for the use of modes of transportation other than single-occupancy vehicles
- Maximum surface parking percentage of gross site area25 pct
Surface parking shall not occupy more than 25 percent of the gross site area.
From the ordinance
The site area for all MUR applications must be at least 2½ contiguous acres. ... Development shall comply with a minimum project area perimeter-building setback of 14 feet from the face of the curb or if there is no curb, from the property line, and a maximum project area perimeter-building setback of 20 feet.