zoneoptics
Craig County Unincorporated, Virginia · General provision

Sec. 58-386 through 58-417

Manufactured Home ParkAll Craig County Unincorporated districts0

Dimensional standards

lot requirementsSTREETFront 35 ftSide 25 ftMin width 60 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Lot

Minimum lot widthLot widthHow wide a lot must be, usually measured at the front setback line.
60 ft

Density

Lot area per dwelling unitLot area per dwelling unitLand required for each home — the same limit as du/acre, expressed per unit instead of per acre.
5,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

SetbacksSetbackThe distance a building must be held back from a lot line.

FrontSetbackThe distance a building must be held back from a lot line.
35 ft
SideSetbackThe distance a building must be held back from a lot line.
25 ft

Parking

Minimum spacesMinimum parkingThe number of off-street spaces a development must provide before it may open.
1.5

Uses

Permitted by right2

From the ordinance

A minimum of 5,000 square feet shall be provided for each manufactured home lot. Each mobile lot shall have a minimum width of 60 feet. Manufactured home lots shall be so designed that no manufactured home is closer than 25 feet to another manufactured home. The setback distance for manufactured homes is 35 feet from all public streets. Setback distance for private streets shall be no less than 25 feet. Parking spaces shall be provided at the rate of 1.5 spaces per manufactured home lot.
Sec. 58-386 through 58-417

Parking requirements

{
  "manufactured_home_lot": "1.5 spaces per lot"
}