Sanger, California · General provision

Sec. 90-222, 90-223, 90-224

Single FamilyAll Sanger districts0

Dimensional standards

lot requirementsSTREETMin width 70 ftMin depth 110 ftMIN LOT AREA10,000 sq ftMIN FRONTAGE50 ftMAX HEIGHT35 ft / 2.5 storiesMAX DENSITY4.36 du/ac
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Extracted standards

8 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Minimum depth for lots facing local streets110 ft

    Lots facing on local streets: 110 feet minimum depth.

  • Minimum depth for lots facing major or secondary highways120 ft

    Lots facing on major or secondary highways: 120 feet minimum depth.

  • Minimum depth for lots backing on railroad rights-of-way130 ft

    Lots backing on railroad rights-of-way: 130 feet minimum depth.

  • Minimum street frontageFrontageThe length of a lot line that touches a public street. width for curved or cul-de-sac streets50 ft

    Lots on curved or turn-around-end or cul-de-sac streets: 50 feet minimum street frontage width.

  • Minimum width for corner lots80 ft

    Corner lots: 80 feet minimum width.

  • Minimum width for interior lots70 ft

    Interior lots: 70 feet minimum width.

  • Minimum width for lots siding on railroad rights-of-way90 ft

    Lots siding on railroad rights-of-way: 90 feet minimum width.

  • Minimum width for reversed corner lots85 ft

    Reversed corner lots: 85 feet minimum width.

From the ordinance

Each lot shall have a minimum area of 10,000 square feet. No building or structure erected in this district shall have a height greater than 2½ stories, not to exceed 35 feet.
Sec. 90-222, 90-223, 90-224