Sec. 48-867

Other

• Drive-through bypass lane width10 ft

  A by-pass lane shall be provided adjacent to the drive-through lane or lanes, with a minimum width of ten feet.

• Drive-through curb cutGrading (cut & fill)Reshaping land by removing earth (cut) or adding it (fill), often capped by volume. distance from intersection150 ft

  The distance between a public street intersection and a curb cut providing access to or from a parcel with a drive-through shall be a minimum of 150 feet.

• Drive aisle clearance from intersection25 ft

  No portion of a drive aisle nor any of the standing spaces required for a drive-through, shall be covered by a roof, overhang, canopy, building or structure within 25 feet of an intersection

• Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built. for drive-through43,560 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  The minimum lot area for a building with a drive-through window shall be no less than one acre (43,560 square feet)

• Minimum street frontageFrontageThe length of a lot line that touches a public street. for drive-through200 ft

  with a minimum street frontage of not less than 200 feet.

• Drive-through setbackSetbackThe distance a building must be held back from a lot line. from residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.50 ft

  the window, service area, or vehicular stacking lane shall be set back at least 50 feet from the property boundary abutting the residential district or park.