Dimensional standards
Lot
Uses
Conditional / special use1
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Noise
- Noise abatement required
Plans shall include provisions for noise buffers to adjacent properties.
Other
- Drive-through lanes buffered
Drive-through lanes shall be buffered against adjacent land uses according to the landscape buffering requirements specified elsewhere in this chapter.
- Minimum by-pass lane width10 ft
A by-pass lane shall be provided adjacent to the drive-through lane or lanes, with a minimum width of ten feet.
- Minimum distance from intersection to curb cutGrading (cut & fill)Reshaping land by removing earth (cut) or adding it (fill), often capped by volume.150 ft
The distance between a public street intersection and a curb cut providing access to or from a parcel with a drive-through shall be a minimum of 150 feet.
- No cover within 25 feet of intersection25 ft
No portion of a drive aisle nor any of the standing spaces required for a drive-through, shall be covered by a roof, overhang, canopy, building or structure within 25 feet of an intersection with any of the following: public right-of-way, pedestrian walkway, drive aisle.
Setback
- SetbackSetbackThe distance a building must be held back from a lot line. from residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. or park50 ft
Where such a vehicle stacking lane, including the required buffer for the lane, abuts a residential zoning district or park, the window, service area, or vehicular stacking lane shall be set back at least 50 feet from the property boundary abutting the residential district or park.
From the ordinance
The minimum lot area for a building with a drive-through window shall be no less than one acre (43,560 square feet), with a minimum street frontage of not less than 200 feet.