Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum freestanding sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft
Such signs shall have a maximum height of eight feet.
- Maximum sign area for multifamilyMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive. rental office3 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One sign with a maximum area of three square feet.
- Maximum sign area for public/charitable/institutional use24 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Not more than two signs with a total area not exceeding 24 square feet.
- Maximum sign area for subdivision/apartmentMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive. identification15 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The area of each sign shall not exceed 15 square feet.
- Maximum sign area for tourist home3 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One sign not exceeding three square feet.
- Maximum wall sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.15 ft
Sign height shall not exceed 15 feet.
- Minimum freestanding sign setbackSetbackThe distance a building must be held back from a lot line. from adjacent property line10 ft
or closer than ten feet to an adjacent property line.
- Minimum freestanding sign setbackSetbackThe distance a building must be held back from a lot line. from right-of-way5 ft
No permitted freestanding sign in a residential district shall be closer than five feet to a public right-of-way.
From the ordinance
Residential districts, R-1A, R-1B, R-TH, R-C and R-M. Signs permitted in R districts...