Sec. 22-274
Dimensional standards
Uses
Prohibited2
Extracted standards
10 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Tower color/finish
Antennas or antenna support structures shall either maintain a galvanized steel finish, or subject to any applicable standards of the FAA, be painted a neutral color, so as to reduce visual obtrusiveness.
Fencing & walls
- Minimum security fence heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
All antenna support structures shall be enclosed by security fencing not less than six feet in height and shall be equipped with an appropriate anti-climbing device.
Landscaping & trees
- Minimum landscaped buffer width15 ft
The standard buffer shall consist of a mix of native trees and shrubs planted in a landscaped area at least 15 feet wide outside the perimeter of the compound.
- Minimum tree diameter to preserve8 in
All living and diseased-free trees eight inches or larger in diameter, measured four and one-half feet from the base shall be preserved and protected during construction of wireless telecommunication facilities, except where clearing is required to accommodate the proposed facilities and vehicular access.
Lighting
- Artificial lighting prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance. unless required by FAA
Antenna support structures shall not be artificially lighted, unless required by the FAA or other applicable authority.
Other
- Abandonment period12 months
At such time that any component of the wireless telecommunication facility ceases to be operated for a continuous period of 12 months, it shall be considered abandoned, and the owner of such facility shall remove same within 90 days of receipt of notice from the department of planning of the removal requirement.
- Annual safety inspection required1 per year
The owner of each antenna support structure shall have a safety inspection conducted annually by a registered professional engineer licensed by the Commonwealth of Virginia and a copy of the inspection report shall be filed with the department of planning by March 30.
- Removal bond required
The applicant shall post a bond, equivalent to the cost of removal of the antenna support structure with the director of planning.
- Tower setbackSetbackThe distance a building must be held back from a lot line. from property lines (percent of heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.)110 pct
All antenna support structures shall be setback 110 percent of the height of the structure from all property lines.
- Tower setbackSetbackThe distance a building must be held back from a lot line. to nearest residential structure400 ft
All antenna support structures must be setback 200 percent of the height of the structure to the nearest residential structure, and in no case less than 400 feet.
From the ordinance
The site shall be a minimum of 2,000 square feet excluding vehicular access areas. Speculative structures are not permitted. Commercial advertising is not permitted on any component of the wireless telecommunication facility.