Riverside County Unincorporated, California · General provision

17.114.100.G

Dimensional standards

lot requirementsSTREETSTREETbuildable areaFront 5 ftRear 3 ftSide 4 ftStreet side 5 ftMin width 35 ftMin depth 58 ftMIN LOT AREA2,000 sq ftMIN FRONTAGE25 ftMAX HEIGHT45 ftMAX LOT COVERAGE75%MIN OPEN SPACE80%
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Extracted standards

15 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Density

  • Maximum units per building18 units

    The maximum number of units within a building shall not exceed eighteen (18) feet.

Fencing & walls

Other

Parking

  • Tandem garages permitted

    Tandem garages are permitted.

From the ordinance

Lot area shall be not less than two thousand (2,000) square feet with a minimum average width of thirty-five (35) feet and a minimum average depth of fifty-eight (58) feet.
17.114.100.G