Riverside County Unincorporated, California · General provision

17.111.080

Dimensional standards

lot requirementsSTREETFront 25 ftSide 25 ftMAX HEIGHT75 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Extracted standards

4 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Fencing & walls

  • Masonry wall requirement6 ft

    Prior to occupancy of any use permitted in this article, a six-foot high solid masonry wall or combination landscaped earthen berm and masonry wall shall be constructed on each property line that adjoins any parcel specifically zoned for residential planning area and as prescribed in Section V of Specific Plan No. 362 (Panorama).

Height

Other

From the ordinance

The uses permitted in Planning Areas 33 and 34 of Specific Plan No. 362 shall be the same as those permitted in Article IXd, Section 9.72 of Ordinance No. 348 [section 17.88.020], except that the uses permitted pursuant to Section 9.72.b. (4), and (6) [section 17.88.020 B.4. and 6.], as indicated in the attached Exhibit A to this ordinance, are not permitted.
17.111.080

Parking requirements

{
  "professional_business_office": "1 space/250 sq. ft. of gross leasable area"
}

Use details

{
  "dropped_conditions": {
    "prohibited_uses": [
      "uses permitted pursuant to Section 9.72.b. (4), and (6)"
    ]
  }
}