zoneoptics
Riverside County Unincorporated, California · General provision

17.73.110

All Riverside County Unincorporated districts0

Dimensional standards

lot requirementsSTREETbuildable areaFront 15 ftSide 5 ftMin width 50 ftMin depth 100 ftMIN LOT AREA6,000 sq ftMIN FRONTAGE50 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Lot

Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.
6,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Minimum lot widthLot widthHow wide a lot must be, usually measured at the front setback line.
50 ft
Minimum frontageFrontageThe length of a lot line that touches a public street.
50 ft
Minimum lot depth
100 ft

SetbacksSetbackThe distance a building must be held back from a lot line.

FrontSetbackThe distance a building must be held back from a lot line.
15 ft
SideSetbackThe distance a building must be held back from a lot line.
5 ft

Extracted standards

1 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Chimneys and fireplaces encroachment2 ft

    Chimneys and fireplaces shall be allowed to encroach into side yards a maximum of two feet.

From the ordinance

Lot area shall be not less than six thousand (6,000) square feet. ... minimum average width ... fifty (50) feet with a minimum average depth of one hundred (100) feet. ... minimum frontage ... fifty (50) feet ... front yard shall be not less than fifteen (15) feet ... side yards on interior and through lots shall be not less than five feet ...
17.73.110