Sec. 9-2.4108(b)(2), Sec. 9-2.4109(a)(b)
Dimensional standards
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Maximum coverage for façade-mounted facilities32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Total facility coverage of a facility mounted to the face of an existing structure may not exceed ten (10%) percent of the square footage of the building face or thirty-two (32) square feet per façade, whichever is less.
- Maximum extension from façade18 in
A facility shall not extend more than eighteen (18") inches from the building face.
- Minimum installation heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.15 ft
The lowest portion of all facilities shall be located a minimum of fifteen (15') feet above grade level.
- Roof-mounted maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.10 ft
A roof-mounted facility shall not exceed the maximum building height of the underlying zone or ten (10') feet above the existing roofline, whichever is less.
The minimum setback for roof-mounted facilities is one foot of setback for every foot in facility height.
From the ordinance
Facilities proposed in residential zones and not meeting the exemption set forth in subsection 9-2.4105(i), may not exceed thirty-five (35') feet in height.