Chesapeake
Zoning districts
19 districts, grouped by category.
Agricultural
1Commercial
3Neighborhood Business District
- Min lot
- 15,000 sq ft (0.34 ac)
- Max height
- 75 ft
- Front setback
- 30 ft
- Permitted uses
- 3
General Business District
- Min lot
- 15,000 sq ft (0.34 ac)
- Max height
- 75 ft
- Front setback
- 35 ft
- Permitted uses
- 4
Urban Business District
- Max height
- 35 ft
- Front setback
- 5 ft
- Permitted uses
- 2
Other
3Industrial
3Light Industrial District
- Min lot
- 2,178,000 sq ft (50 ac)
- Permitted uses
- 8
Heavy Industrial District
- Min lot
- 2,178,000 sq ft (50 ac)
- Permitted uses
- 10
Waterfront Industrial District
- Min lot
- 15,000 sq ft (0.34 ac)
- Max height
- 75 ft
- Front setback
- 25 ft
- Permitted uses
- 3
Open space
5Residential
4R-10
- Min lot
- 10,000 sq ft
- Max height
- 35 ft
- Front setback
- 25 ft
- Permitted uses
- 2
R-6 Residential District
- Min lot
- 6,000 sq ft
- Max height
- 35 ft
- Front setback
- 20 ft
- Permitted uses
- 1
R-8
- Min lot
- 8,000 sq ft
- Max height
- 35 ft
- Front setback
- 25 ft
- Permitted uses
- 2
Residential Estate District
General provisions
588 rules that bind every district rather than one — sign regulations, parking, floodplain and the rest of the code’s citywide chapters.
Lots in the R-12s zoning district may only be reduced to comply with the minimum lot size requirements for the R-10s zoning district.
Lots in the R-12(a)s zoning district may only be reduced to comply with the minimum lot size requirements for the R-10s zoning district.
Lots in the R-10s zoning district may only be reduced to comply with the minimum lot size requirements for the R-8 zoning district.
Required off-street parking spaces in the industrial zoning districts may only be adjusted according to the following: The number of off-street parking spaces required by the applicable parking group for a use, as set out in section 19-411, may only be reduced by a maximum of twenty-five (25) percent of the number of spaces required for the use.
The maximum building height in the R-MF-1 and R-MF-2 zoning districts may only be adjusted according to the following: The maximum building height may be adjusted to allow one additional story. No adjustment to the maximum building height under this section shall result in a structure higher than forty-five (45) feet.
The maximum building height in the R-MF-1 and R-MF-2 zoning districts may only be adjusted according to the following: The maximum building height may be adjusted to allow one additional story. No adjustment to the maximum building height under this section shall result in a structure higher than forty-five (45) feet.
Minimum lot size, 10,000 square feet. Minimum lot width, 80 feet. Minimum lot frontage, 64 feet. Principal building setback: front 30 ft, side 15/20 ft, rear 30/35 ft. Max lot coverage 30%. Max height 75 ft (35 ft if abutting residential).
Minimum lot size, 10,000 square feet. Minimum lot width, 80 feet. Minimum lot frontage, 64 feet. Principal building setback: front 30 ft, side 15/20 ft, rear 30/35 ft. Max lot coverage 30%. Max height 75 ft (35 ft if abutting residential).
Source documents
The chapters of the adopted code that were retrieved, read and extracted from. Everything above traces back to one of these.
- Chapter 110.7K charsRead →
- Chapter 10112.5K charsRead →
- Chapter 1174K charsRead →
- Chapter 1297.8K charsRead →
- Chapter 13167.7K charsRead →
- Chapter 14321.6K charsRead →
- Chapter 15467.5K charsRead →
- Chapter 16370.1K charsRead →
- Chapter 1774.7K charsRead →
- Chapter 18126.6K charsRead →
- Chapter 1957.3K charsRead →
- Chapter 213.6K charsRead →
- Chapter 2079K charsRead →
- Chapter 21265.1K charsRead →
- Chapter 2294.3K charsRead →
- Chapter 2357.4K charsRead →
- Chapter 328.2K charsRead →
- Chapter 49.2K charsRead →
- Chapter 5149.2K charsRead →
- Chapter 635.3K charsRead →
- Chapter 738.6K charsRead →
- Chapter 8284.9K charsRead →
- Chapter 9199.4K charsRead →