County (unincorporated) · Virginia

Hanover County Unincorporated

This locality is on the roster but its ordinance has not been retrieved yet.
20
Districts
310
Extracted rules
1,345
Standards
6
Chapters read
Zoning snapshotNot yet acquired

Zoning districts

20 districts, grouped by category.

General provisions

290 rules that bind every district rather than one — sign regulations, parking, floodplain and the rest of the code’s citywide chapters.

Sections 26-274, 26-275(f), 26-276(d)3 standards

In those portions of an MX District that are used solely for residential uses... In those portions of an MX District that are used solely for business uses... In those portions of the district that are used solely for limited industrial uses...

Sections 26-324 through 26-3496 standards

General provisions for conditional use permits, special exceptions, and enforcement.

Sections 26-36 through 26-384 standards

The following uses may be permitted as special exceptions: ... Fences up to seven (7) feet in height...

Sections 26-42 to 26-54

Maximum density shall be one (1) residential unit per six and one-quarter (6.25) acres. A minimum of seventy (70) percent of the net acreage shall be conservation areas. Structures shall not exceed 2.5 stories or 35 feet.

Sections 26-47 through 26-544 standards

Maximum density shall be one (1) residential unit per six and one-quarter (6.25) acres. ... Height not exceed 2.5 stories or 35 ft.

Sections 26-54.1 through 26-54.64 standards

The purpose of this district is to preserve and enhance historic villages... mix of small-scale institutional, commercial, and single-family residential uses.

Sections 26-70 through 26-8591 standards

The RM District provides for a range of density... minimum density shall be four (4) residential units per acre. There shall be no minimum lot size in the RM district. The minimum front yard setback for all structures shall be fifteen (15) feet from the internal roads designed to state standards. Structures... shall not exceed a height of five (5) stories or sixty (60) feet, whichever is less. All development shall be served by public water and sewer systems.

Sections 26-86 through 26-9679 standards

The purpose of this district is to encourage large-scale developments... The minimum area for a Mixed Use District shall be twenty (20) acres... No less than twenty-five (25) percent of the net developable area of the overall district shall be set aside as open space... The gross density of the net developable area of the district shall be as follows: 1. For areas shown on the General Land Use Plan... as Planned Business, Commercial, Mixed-Use and Multi-Use, the maximum density shall not exceed fifteen (15) units per acre; 2. For areas shown... as Multi-family, the maximum density shall not exceed fifteen (15) units per acre. 3. For areas shown... as Suburban High, the maximum density shall not exceed eight (8) units per acre. All MX Districts shall be developed with public utilities. Parking shall be provided within the district as follows: a. 2.25 parking spaces per dwelling unit; b. 1 parking space per three hundred (300) square feet of approved commercial or industrial uses. Single-family dwelling units, both attached and detached shall not exceed a height of four (4) stories or fifty (50) feet, whichever is less. Multiple-family structures all other commercial and institutional uses, including combined use structures, shall not exceed a height of five (5) stories or sixty (60) feet, whichever is less.

Sections 26-97 through 26-98

The purpose of this district shall be primarily to provide for and serve the needs of nonretail office business uses... A building or land shall be used only for the following purposes: 1. Data processing center, internet service providers (ISPs), search portals, and related services. 2. Exam Preparation and Tutoring.

Site Plan Requirements1 standards

The location and dimensions of all existing and proposed buildings and structures, including setbacks from lot lines; ...

Source documents

The chapters of the adopted code that were retrieved, read and extracted from. Everything above traces back to one of these.