Bluefield
Zoning districts
14 districts, grouped by category.
Commercial
4Business District 1
- Max height
- 1 ft
- Front setback
- 35 ft
- Permitted uses
- 3
B-2 Business District
- Max height
- 35 ft
- Front setback
- 10 ft
- Permitted uses
- 11
B-3 Business District
- Max height
- 35 ft
- Front setback
- 35 ft
- Permitted uses
- 18
Shopping Center District
- Front setback
- 60 ft
- Permitted uses
- 3
Industrial
2Open space
1Residential
5Residential Limited District
- Min lot
- 12,000 sq ft (0.28 ac)
- Max height
- 35 ft
- Front setback
- 50 ft
- Permitted uses
- 10
Residential Estates District
- Min lot
- 43,560 sq ft (1 ac)
- Max height
- 35 ft
- Front setback
- 50 ft
- Permitted uses
- 6
Residential Limited District
- Min lot
- 7,500 sq ft
- Max height
- 35 ft
- Front setback
- 50 ft
- Permitted uses
- 10
Medium to High Density Residential District
- Min lot
- 7,500 sq ft
- Max height
- 35 ft
- Front setback
- 40 ft
- Permitted uses
- 5
Residential Limited with Manufactured Homes District
- Min lot
- 7,500 sq ft
- Max height
- 35 ft
- Front setback
- 50 ft
- Permitted uses
- 12
General provisions
109 rules that bind every district rather than one — sign regulations, parking, floodplain and the rest of the code’s citywide chapters.
Conditional use permits for temporary construction housing parks may be issued by the town council... A minimum area of 2,000 square feet be provided for each space.
The mountain ridge overlay district shall require the following: A conditional use permit must be obtained for tall structures 3,000 feet above sea level. Plans must be submitted... A detailed plan must be submitted... Erosion and sediment control plans must be submitted... As a condition of granting a conditional use permit, a bond shall be required...
The mountain ridge overlay district shall require the following: (1) A conditional use permit must be obtained for tall structures 3,000 feet above sea level. ...
The minimum setback requirements as set forth in this chapter for residential districts may be modified for existing lots that are nonconforming in the required minimum lot size and/or frontage regulations. This modification may only be used for a new single-family residential structures or unless a conditional use permit is obtained.
The minimum setback requirements as set forth in this chapter for residential districts may be modified for existing lots that are nonconforming... An approved setback modification shall expire within one year after approval by the town council.
The guidelines as described in the Municipal and Development Guidance Manual are applicable for big-box retail uses larger than 60,000 square feet in size and all developments within the SC-1 and SC-OP districts.
The guidelines as described in the Municipal and Development Guidance Manual are applicable for big-box retail uses larger than 60,000 square feet in size and all developments within the SC-1 and SC-OP districts.
Earth station antennae or satellite dish antennae shall be considered as accessory structures when installed in residential districts zoned R1-A, R-2, R-3, R-4 and MHS...
Earth station antennae or satellite dish antennae shall be considered as accessory structures when installed in residential districts zoned R1-A, R-2, R-3, R-4 and MHS and shall conform to the following installation requirements: ...
Source documents
The chapters of the adopted code that were retrieved, read and extracted from. Everything above traces back to one of these.