Amelia County Unincorporated, Virginia · District

M-1

M-1 Industrial District

Dimensional standards

M-1 lot requirementsSTREETbuildable areaRear 10 ftSide 10 ftMin frontage 100 ftMIN LOT AREA10,000 sq ftMAX LOT COVERAGE70%
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Extracted standards

4 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Buffer distance from corner50 ft

    Landscaping or other buffering measures may be permitted up to a height of three feet, and to within 50 feet from the corner of any intersecting streets or roads.

  • Enclosure requirement

    Permitted uses shall be conducted wholly within a completely enclosed building or within an area enclosed on all sides by a solid masonry wall, a uniformly painted solid-board fence or evergreen hedge six feet in height.

  • Landscaping or other buffering measures may be permitted up to a height of three feet, and to within 50 feet from the corner of any intersecting streets or roads.

  • Screening width20 ft

    Sufficient area, at a minimum of 20 feet, shall be provided to adequately screen permitted uses from adjacent business, agricultural and residential districts.

From the ordinance

Ten-thousand-square-foot lots within districts. Frontage: 100 feet. Buildings or groups of buildings with their accessory buildings may cover up to 70% of the area of the lot.
Article XX, § 325-20.2, § 325-20.3, § 325-20.4, § 325-20.5, § 325-20.6