White Hall

Subdivision regulations for White Hall, AR, covering streets, lots, blocks, easements, sewer, water, storm drainage, monuments, plans, fees, and penalties.

No single lot or parcel may have more than one manufactured home placed on it unless it meets the requirements of a MANUFACTURED HOME PARK. No sale/display of manufactured homes is permitted.

An on-lot space available for the parking of one motor vehicle and having dimensions of nine feet by 34 feet inclusive of space necessary to provide access to a street or alley.

A permanent type opaque fence of wood or masonry construction having a height of not less than six feet shall be erected and maintained between such area and the property in a residential zone.

The placement on a site of any type of structure... intended to remain on the site for a period not to exceed six months.

Same as in an R-1 District. Conditional uses upon satisfaction of the provisions of § 154.047.

All new and substantial construction shall be designed and anchored to prevent flotation, collapse or lateral movement...

Developments in regulatory floodways are prohibited, unless a no-rise certificate is submitted.

In zone A, the applicant must determine a base flood elevation prior to construction.

Minor residential streets. The following minimum standards shall apply to the design of minor residential streets. Standard Urban Rural Right-of-way 50 feet 50 feet Pavement width 27 feet 22 feet Type of curb Vertical N/A Sidewalk width 4 feet N/A Design speed 30 30

Requirements for manufactured homes on individual lots: ... not more than 15 years old, minimum width 28 feet, minimum length 44 feet, permanent foundations, etc.

R1-5.0 (MH) — 5,000 square feet minimum lot size with 45 feet minimum width. In the MH Mobile Home District the maximum height of buildings, the minimum required setbacks, and the maximum allowable density shall be as follows: Height: no building shall exceed one story or 15 feet. The minimum setback from any perimeter property line shall be 25 feet. The minimum setback from any interior street shall be 20 feet. The minimum separation between manufactured homes shall be 20 feet. The minimum side and back yard setback shall be ten feet. The maximum allowable density in any manufactured home park/subdivision shall be eight manufactured homes per acre.

R1-5.5 (MH) — 5,500 square feet minimum lot size with 50 feet minimum width. In the MH Mobile Home District the maximum height of buildings, the minimum required setbacks, and the maximum allowable density shall be as follows: Height: no building shall exceed one story or 15 feet. The minimum setback from any perimeter property line shall be 25 feet. The minimum setback from any interior street shall be 20 feet. The minimum separation between manufactured homes shall be 20 feet. The minimum side and back yard setback shall be ten feet. The maximum allowable density in any manufactured home park/subdivision shall be eight manufactured homes per acre.

R1-6.5 (MH) — 6,500 square feet minimum lot size with 60 feet minimum width. In the MH Mobile Home District the maximum height of buildings, the minimum required setbacks, and the maximum allowable density shall be as follows: Height: no building shall exceed one story or 15 feet. The minimum setback from any perimeter property line shall be 25 feet. The minimum setback from any interior street shall be 20 feet. The minimum separation between manufactured homes shall be 20 feet. The minimum side and back yard setback shall be ten feet. The maximum allowable density in any manufactured home park/subdivision shall be eight manufactured homes per acre.

No-impact home occupations... do not require a permit and are permitted in all residential zones. Minor impact home occupations... require approval by the Zoning Administrator... Major impact home occupations... require a conditional use permit and Planning Commission approval...

The home occupation(s) in totality must occupy no more than 25% of the floor area of the residence or 500 square feet, whichever is less.

The following fees shall be established for applications and permits provided for by these regulations to defray the costs of advertising, mailing notices, processing, inspecting, and copying applications, permits, and use permits: