Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum building identification sign area24 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One (1) square foot of total sign area for each dwelling unit located on the lot or parcel. Signs not to exceed two (2) in number, provided the combined area of both signs does not exceed the total allowable sign area of twenty-four (24) square feet. No permitted identification sign shall be required to be less than ten (10) square feet in area.
- Maximum construction sign area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Construction sign: Unlighted construction sign, or signs, as defined in this section, not to exceed a total area of thirty-two (32) square feet. Sign, or signs, to be removed prior to final inspection by the building department.
- Maximum no-peddling sign area72 sqin
One (1) unlighted no-peddling sign as defined in this chapter, not to exceed seventy-two (72) square inches in area.
- Maximum real estate sign area12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Real estate sign: One (1) unlighted sign of a maximum area of twelve (12) square feet and with a maximum of four (4) feet in any dimension, offering the premises for sale, lease, rental, or for inspection by the public.
From the ordinance
R-V Zone, Residential Variable: (a) On a lot or parcel containing three (3) or less dwelling units, only those signs permitted in the R-1 Zone. (b) On a lot or parcel containing four (4) or more dwelling units, one (1) building identification sign flush against the wall of the building...