Dimensional standards
Servicing
- Geographic extent
- Applies to any zone districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. zoned for residential use.
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Decorative paving percentage15 pct
A minimum of fifteen (15) percent of the driveway area shall be surfaced with brick, pavers or other comparable decorative paving systems.
- Maximum garage frontageFrontageThe length of a lot line that touches a public street.50 pct
Garages shall not occupy more than fifty (50) percent of the linear building frontage facing the right-of-way and shall be set back a minimum of five (5) feet from the front facade.
- Minimum distance between buildings10 ft
Ten-foot minimum distance shall be required between buildings.
- Minimum open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted. per unit300 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
A minimum of three hundred (300) square feet of open space per residential dwelling unit, with a minimum dimension of ten (10) feet in any direction is required.
- Single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. residences only
All dwelling units shall be single-family residences.
- Trash storage
Projects shall provide adequate trash storage space as determined by the director of community development and the building official.
From the ordinance
Two (2) enclosed parking spaces per unit. ... A minimum of three hundred (300) square feet of open space per residential dwelling unit...
Parking requirements
{
"unit": "2 enclosed spaces per unit",
"guest": "1 per 2 units"
}