Sec. 11-1.30.04

Other

• Ground utility equipment setbackSetbackThe distance a building must be held back from a lot line. from corner property line10 ft

  All ground-mounted utility equipment shall be a minimum of two (2) feet from interior property lines, ten (10) feet from corner property lines and not located within the required front yard setback area.

• Ground utility equipment setbackSetbackThe distance a building must be held back from a lot line. from interior property line2 ft

  All ground-mounted utility equipment shall be a minimum of two (2) feet from interior property lines, ten (10) feet from corner property lines and not located within the required front yard setback area.

• Max architectural projection into front/rear yardYardThe open space left between a building and its lot line — the space a setback creates.5 ft

  Surface-mounted architectural features such as, but not limited to, cornices, eaves, and chimneys may project up to fifty (50) percent or two and one-half (2.5) feet into the required side yard setback, whichever is less, and up to five (5) feet in the required front, rear, and corner side yard setback.

• Max architectural projection into side yardYardThe open space left between a building and its lot line — the space a setback creates.2.5 ft

  Surface-mounted architectural features such as, but not limited to, cornices, eaves, and chimneys may project up to fifty (50) percent or two and one-half (2.5) feet into the required side yard setback, whichever is less, and up to five (5) feet in the required front, rear, and corner side yard setback.

• Max deck/balcony projection5 ft

  Decks, balconies, open stairways, and other types of landings with any portion located above grade or ground floor, whichever is higher, may project up to five (5) feet into the principal structure's front, rear, and corner side yard setbacks.

• Max eave projection2.5 ft

  Roof eaves may project a maximum of two and one-half (2.5) feet into a required yard provided it maintains a two and one-half (2.5)-foot setback from all property lines.

• Max porch projection into front/rear yardYardThe open space left between a building and its lot line — the space a setback creates.10 ft

  Lattice and covered unenclosed porches located along the first floor and attached to a principal structure may project up to ten (10) feet into the required front and rear setback irrelevant of the unit's conformity to setback requirements.

• Max utility projection1 ft

  Rain conductors, spouts, utility service risers, and shutoff valves may project a maximum distance of one-foot into any required yard setback.

• Pool equipment setbackSetbackThe distance a building must be held back from a lot line. from interior property line3 ft

  Pool and spa-equipment shall be a minimum of three (3) feet from interior property lines, ten (10) feet from the secondary front and not located within the front yard.

• Pool equipment setbackSetbackThe distance a building must be held back from a lot line. from secondary front10 ft

  Pool and spa-equipment shall be a minimum of three (3) feet from interior property lines, ten (10) feet from the secondary front and not located within the front yard.

• Roof utility equipment prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance. if visible

  Utility and mechanical equipment that is visible from the public right-of-way or an adjacent property may not be located on the roof of a single-family residence.