Dimensional standards
Height & bulk
Servicing
- Applies near
- SR 91
- Geographic extent
- Freeway overlay districtOverlay districtA second set of rules laid over the base district, adding requirements without replacing it. (FO) along the SR 91 freeway corridor.
Extracted standards
10 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum number of billboards in FO districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.4 count
The number of billboards located within the FO district shall not exceed a total of four, with a maximum of two faces per billboard.
- Maximum billboard face area1,500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The maximum size of each digital billboard face display area shall be 25 feet in height and 60 feet in width, with the area of each face not to exceed an overall maximum of 1,500 square feet, including border and trim.
- Maximum billboard heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.55 ft
The maximum height of each digital billboard shall be 55 feet above the adjacent pavement level of the SR 91 freeway to the bottom of the digital display.
- Minimum spacing between billboards1,000 ft
No digital display billboard may be located within 1,000 feet of another digital display billboard on the same side of the SR 91 right-of-way.
- Billboards prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance. in certain zones
Digital display billboards shall not be erected on properties zoned as: R-1—Single-family district residential; R-3—Multiple family residential districts; VO—Village residential overlay district; or OS—Open-space/recreation district.
- Maximum pole sign area per face160 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The allowable sign area for the face of a pole sign shall be a maximum of 160 square foot for each sign face, with a total aggregate area not to exceed 320 square feet for each double-sided pole sign.
- Maximum number of pole signs per parcel1 count
No more than one pole sign per parcel in the FO district.
- Maximum total pole sign area320 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The allowable sign area for the face of a pole sign shall be a maximum of 160 square foot for each sign face, with a total aggregate area not to exceed 320 square feet for each double-sided pole sign.
- Maximum signboard heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.25 ft
No signboard shall be larger than 25 feet in height and 60 feet in width, excluding border, trip, and supports.
- Maximum signboard width60 ft
No signboard shall be larger than 25 feet in height and 60 feet in width, excluding border, trip, and supports.
From the ordinance
These regulations in this division concerning signboards are established to permit larger on-site and off-site signage on properties within the freeway overlay district (FO)...