Extracted standards
3 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum absolute sign area50 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
nor in any case 50 square feet
- Maximum sign area per linear foot of building frontageFrontageThe length of a lot line that touches a public street.1.5 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000./ft
the aggregate area of all permanent signs located on a lot shall not exceed one and one-half square feet for each linear foot of building frontage along the street
- Maximum sign area (narrow lots)50 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
For lots with a combined width of 33 feet or less along their principal street frontage, the combined surface area of all signs for the lot shall not exceed 50 square feet.
From the ordinance
For lots with a combined width of 33 feet or less along their principal street frontage, the combined surface area of all signs for the lot shall not exceed 50 square feet. For all other lots the aggregate area of all permanent signs located on a lot shall not exceed one and one-half square feet for each linear foot of building frontage along the street, nor in any case 50 square feet