Vinton, Virginia · District

M-2

IndustrialGeneral IndustrialAll Vinton districts0

Dimensional standards

M-2 lot requirementsSTREETMin width 100 ftMIN LOT AREA20,000 sq ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Permitted by right36

Conditional / special use9

Extracted standards

4 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

From the ordinance

The minimum lot area for such use shall be 20,000 square feet and the minimum lot width shall be 100 feet; ... The lot area shall contain a minimum of 20,000 square feet; and the outdoor storage area shall be accessory to a building on the same lot and shall have a maximum area of no greater than 80 percent of the gross floor area of the building.
Sec. 5-8, 5-17

Use details

{
  "dropped_conditions": {
    "permitted_uses": [
      "Manufacturing: Compounding, assembling, treatment or packaging of articles of merchandise from the following materials, when such materials are refined, prepared or initially processed elsewhere: Bone, canvas, cloth, cork, feathers, felt, fiberglass, fibers, fur, glass, hair, horn, leather, paper, plastic, precious or semiprecious metals or stones, rubber, shell, straw, textiles, tobacco, wood, yarn, and similar materials"
    ],
    "conditional_uses": [
      "Must be the same color or material as the new structure and covered by rustproof treatment or material.",
      "Must be flush-mounted to the new structure or supported by mounting brackets.",
      "Must not exceed 32 cubic feet in volume.",
      "When the related equipment is not located on property that meets subsection a., each provider is limited to a cabinet or"
    ]
  }
}