Dimensional standards
Lot
Servicing
- Geographic extent
- Standards in the M-1 limited industrial districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. and M-2 general industrial districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2..
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.20,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The minimum lot area for such use shall be 20,000 square feet
the minimum lot width shall be 100 feet
- Outdoor activity setbackSetbackThe distance a building must be held back from a lot line. from side/rear property lines5 ft
Outdoor activities related to the use shall not be conducted within five feet of any side or rear property lines
- Parking/display separation from public street lines10 ft
all areas devoted to the parking, circulation or display of vehicles shall be separated ten feet from public street lines
- Screening required within distance of residential100 ft
Any such use located within 100 feet of a residential or R-B district shall be provided with screening
From the ordinance
The minimum lot area for such use shall be 20,000 square feet and the minimum lot width shall be 100 feet;