Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Loading area cannot be used for parking
No area allocated to loading and unloading facilities may be used to satisfy the area requirements for off-street parking, nor shall any portion of any off-street parking are be used to satisfy the area requirements for loading and unloading facilities.
- Loading space overhead clearance14 ft
Minimum dimensions of 12 feet by 55 feet and overhead clearance of 14 feet from street grade required.
- Loading space fence heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
fence not less than six feet in height
- Loading space length55 ft
Minimum dimensions of 12 feet by 55 feet and overhead clearance of 14 feet from street grade required.
- Additional loading space per 72,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.1 space per 72,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Plus one space for each additional 72,000 square feet or fraction thereof.
- Loading space setbackSetbackThe distance a building must be held back from a lot line. from residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.50 ft
No such space shall be located closer than 50 feet to any other lot in any residential district unless wholly within a completely enclosed building or unless enclosed on all sides by a wall or uniformly painted board fence not less than six feet in height.
- Loading space width12 ft
Minimum dimensions of 12 feet by 55 feet and overhead clearance of 14 feet from street grade required.
From the ordinance
Minimum dimensions of 12 feet by 55 feet and overhead clearance of 14 feet from street grade required.