Dimensional standards
Lot
Height & bulk
- Minimum landscaping
- 20%
Housing
Uses
Permitted by right3
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Height
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for industrial structures60 ft
industrial structures may be erected to a maximum height of 60 feet, provided the required setback is increased a distance of not less than one foot for each one foot of height that it exceeds the 40-foot limit.
Other
- Buffer yards required
Buffer yards shall be provided as described in Article XVIII.
- Minimum districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. area435,600 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Minimum area required for creation of a BP District shall be ten acres
- Minimum incremental addition area217,800 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
incremental additions to such district shall consist of not less than five acres
- Screening required
outdoor storage, extensive off-street parking areas, and service areas for loading and unloading vehicles, and for storage and collection of refuse and garbage shall be effectively screened.
- Underground utilities required
All structures shall be served by underground utility lines.
From the ordinance
Maximum total floor area permissible in a Planned Business Park shall not exceed floor area ratio (FAR) 0.25 for the land area of the BP, and no structure or structures shall cover more than 50 percent of the lot.