Sec. 4-517
Dimensional standards
Lot
Density
Uses
Permitted by right1
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum density6 du/acredu/acreDwelling units per acre — the number of homes allowed on each acre of land.
Overall project density shall not exceed six dwelling units per acre including public or commonly used rights-of-way constructed to serve the project.
- Minimum distance between unattached structures40 ft
The minimum distance between any two unattached townhouse structures shall be 40 feet. The setback shall be increased to 60 feet if the townhouse structures are face to face.
- Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built. per unit2,500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Each townhouse shall be erected or placed on a specifically designated land area or on a lot containing not less than 2,500 square feet.
- Minimum units10 units
For townhouses for sale and similar attached development types, the development or project shall consist of at least ten dwelling units with no less than three and no more than six units contiguous to one another.
From the ordinance
For townhouses for sale and similar attached development types, the development or project shall consist of at least ten dwelling units with no less than three and no more than six units contiguous to one another. Public water and public sewer service shall be provided. Overall project density shall not exceed six dwelling units per acre including public or commonly used rights-of-way constructed to serve the project. Each townhouse shall be erected or placed on a specifically designated land area or on a lot containing not less than 2,500 square feet. The minimum distance between any two unattached townhouse structures shall be 40 feet. The setback shall be increased to 60 feet if the townhouse structures are face to face.